The Rennco Lift Seal Heat Sealer is ready for use after a short "warm-up" period. Simply enter the temperature setting for the material being used, place the edge of the bag in the seal area, lift the safety bar, and the Lift Seal automatically makes a 1/2" seal with approximately 30 PSI of consistent sealing pressure. In approximately 2 seconds, the lower safety bar automatically opens for easy removal of the bag. Constant temperature is maintained by an internal heat control during the sealing process. The Lift Seal Heat Sealer will not cycle if an object exceeding 1/8" thick is in the sealing area, providing safe operation.
The Rennco Lift Seal Heat Sealer is quick and easy to operate and maintain. The lower silicone rubber bar is raised by a rugged mechanical drive to meet the stationary 1/2" wide heated sealing bar above. This bar is covered with a special "non-stick" fabric which is manually advanced by a simple turn of a knob as the fabric becomes worn. The fabric roll is ample for months of use and is quickly replaced by snapping the new roll into position.